Overview
AXIS M 20.2
DISC SPREADERS WITH UNIVERSAL DRIVE SHAFT
AXIS M 20.2 D | with double-acting hydraulic slide actuators |
---|
COMPACT AND PROFESSIONAL TWO-DISC FERTILISER SPREADER
AXIS M 20.2 offers professional spreading technology especially for future-oriented businesses. The low filling height of the AXIS M 20.2 makes it ideal for filling dump trucks. With its unique performance potential, it sets new standards for professional agriculture.
Benefits
M-Drive
Quantron-A | Axis
QUANTRON-A regulates the opening position of the dispensing gates and thus the flow rate depending on the driving speed and the specified application rate.
When the driving speed varies, the preselected application rate always stays the same. QUANTRON-A impresses users with its large, clear display and intuitive menu navigation. All functions can be operated remotely, comfortably and safely with just one hand.
Gate Version
THE RIGHT GATE VERSION FOR EVERY TRACTOR
The dispensing gates are remotely and elegantly opened and closed mechanically, hydraulically, or electrically on the left and right side independent of each other. Spreading is even possible on wedge-shaped surfaces with partial width accuracy.
E-Click
The special thing about E-Click: The electrical dispensing gates can be controlled separately from each other on the left and right side using a toggle switch. A control diode displays the current gate position. This greatly minimises operating errors.
The E-Click control terminal is elegantly connected to the fertiliser spreader by a cable. The need to connect hydraulic hoses is thus completely eliminated. High-quality, dust and splash-proof actuators ensure a high level of operating comfort and a long service life for your investment.
The electric E-Click dispensing gate control is particularly suitable for smaller tractors with only a few hydraulic connections.
CDA Spreading Technology | Manual
CDA SPREADING TECHNOLOGY – FUNCTIONALITY MEETS ELEGANCE
The coaxial dispensing and output point, short CDA scattering technology, makes it all possible. Setting up a two-disc fertiliser spreader has never been as easy. All functions are set quickly, safely and in an ergonomically ideal position using the CDA control terminal.
- Fertiliser type and quality
- Working width
- Dispensing volume
Brilliant: An easy-to-control turn on the CDA control terminal is sufficient to quickly and safely set the fertiliser outpoint point, the fertiliser grade as well as the spreading width. For spreaders without dispensing electronics, the desired quantity to be dispensed is also adjusted here at the same time.
The big advantage: The usual procedure of setting the spreader vanes is not necessary with AXIS.
For machines without scatter computers, the spread rate setting is as simple as it is precise. Pre-selecting the quantity for demand-based, incremental dispensing starting from 3 kg/ha takes place using a large, clear scale sheet, separated for the right and left side. The volume-proportional DfC scale, exclusively from RAUCH, offers the possibility of proportionally varying the application rate quickly following the calibration test.
DfC also makes it easy to change the volume to be dispensed from one beat to another.
The clear, comprehensive fertiliser chart available on the Internet or as a smartphone app contains all the relevant setting information. Typical RAUCH: detailed data on slug pellets and seeds is also listed in the fertiliser chart
Varispread V8
The AXIS M 20.2/30.2 with QUANTRON-A and manual CDA output point adjustment has 8-way section control as standard. With this alternative to the VariSpread pro, the remote-controlled adjustment of the dispensing gate positions allows for 4 sections per side.
Key Features
Hopper Capacity
1,000 - 2,300L
Drive
M-Drive
Working Width
12 - 36m
Technical Specifications
AXIS M 20.2 D | |
---|---|
Basic machine | |
Working width [ m ] | 12 – 36 |
Hopper volume [ l ] | 1,000 |
Max. capacity [ kg ] | 2,300 |
Container size [ cm ] | 240 x 130 |
Filling height [ cm ] | 95 |
Filling width [ cm ] | 230 |
Empty weight [ kg ] | 300 |
Tractor attachment | Three point category II/III |
Drive | M drive: Universal drive shaft with ratchet safety clutch 540 rpm |
Metering | |
Slide actuation/quantity regulation | Hydraulic metering slide |
Servomotors | - |
Variable Rate Control | No |
Electronics | - |
Section control | VariSpread V2 partial width controller |
Limited border spreading | Limited border spreading with TELIMAT, Limited border spreading with GSE |
Brochure
Find out more about this product by downloading our brochure
Specifications
Hopper Cover and AP Drive
The perfect protection against moisture and dirt from the tyres. All AXIS hopper covers p[en over the entire filling area thanks to the high quality “convertible-like folding” feature.
So filling can carry on, trouble free, as usual. An opening mechanism with a long lever arm makes it easy to open and close the hopper cover.
Even with a hopper cover, the fill level can still be checked quickly and easily from the tractor cab via the window areas in the cover
Option:
On request, the hopper cover can be operated remotely from the cab via the electric AP-Drive (only with AXIS of the .2 series with Quantron-A or ISOBUS).
Parking Rollers ASR 25
Enjoy more flexibility when it comes to spreader attachments and dismantling with the large ASR 25 parking rollers. A quick-release coupling system allows the rollers to be removed at any time or mounted in transport position.
AXIS Lighting with Warning Signs
High-quality LED headlights, integrated in the warning signs, ensure more safety on the road.
Front Lighting
High-quality LED headlights, integrated in the warning signs, provide a good view of the tractor.
GPS Speed Sensor
In order to be able to regulate spreading according to the driving speed, the QUANTRON-A and QUANTRON-K2 scatter computers, and the ISOBUS from the tractor unit. If the tractor itself is not equipped with this signal, either a wheel sensor must be retrofitted or you can use this GPS speed sensor
A GPS signal in combination with an acceleration sensor generates a high-precision speed signal. This is especially recommended if the spreader is used in combination with several tractors or is also shared by the different companies.
Another great advantage of this is that the slip of the tractor tyres in wet conditions or slopes does not matter and does not adversely affect the spreading result.
GPS Control with CCI 800
Limited Border Spreading GSE AXIS/AXENT
The GSE 30 and GSE 60 enable sharp-edged border spreading on the left and right side directly on the field boundary with half-side spreading. The distance to the border can be varied between 0 to 3m. GSE 30 os the thrower shield for AXIS M 20.2/30.2. GSE 60 is suitable for use with AXIS M 50.2 and Axent.
Optionally, GSE 30/60 can be remotely controlled hydraulically
- Using the FHD 30-60 remote control via a double acting tractor control valve
Limited Border Spreading Telimat AXIS
TELIMAT T25/T50
TELIMAT enables precise, hydraulically remote-controlled edge and border spreading right from the first tracks. The double-adjustable spreading compartments redirect the fertiliser to fulfil the requirements of the European environmental standard.
Without the need for stopping and dismounting, the TELIMAT T25 swings up and down on the AXIS 20 and 30 via a single-acting tractor control valve. AXIS M 50.2W ISOBUS is equipped with a TELIMAT T50 remote control as standard.
Level Sensors | AXIS
For each AXIS with electronics one level sensor can be optionally fitted to the filling sieve per container side. These sensors give off a warning in the display should level on the respective side get too low. This accessory is particularly interesting for machines without remaining quantity scale or for spreaders with section control, which work in a very one-sided manner, and it also helps to avoid flaws.
Practical Test Set
More safety when spreading
RAUCH PPS 5 Practical test set permits cross-distribution to be checked and corrected quickly and easily in the field. This provides even more reliability and accuracy during spreading, particularly with fertilisers of lower quality, problematic discharge properties or unknown origin.
In combination with the clear and comprehensible AXIS-CDA tuning logic, corrections are amazingly easy and secure.
PPS 5 components:
- 10 collecting trays
- 5 measuring cylinders
- 1 roller tape measure
- clear, logical operating instructions
Dirt Deflector with Quick Release Fastener
A practical idea makes it all the way to the series production. With the assembling tool located on the spreader, the three attachment points of the mud flaps can be released quickly and easily with a quarter turn. So cleaning the machine quickly and carefully is a snap.
Spreadlight | AXIS
Modern GPS-controlled OptiPoint headland management systems and VariSpeed section controls make precise fertiliser spreading possible – even at night. So far, however, it has been very difficult for the driver to visually check the individual spreader functions while spreading in the dark. In addition, obstacles in the spreading area pose a risk at night.
Thanks to the SpreadLight work lights, RAUCH has solved these problems. Modern, powerful LED work lights directly above the two spreader discs of the fertiliser spreader illuminate the spread fans on the left and right side.
The driver has the s[read fan in full view thanks to SpreadLight. Possible incorrect settings or clogging at the dispensing gates are recognised immediately. Moreover, the operator can respond more quickly to difficult-to-detect obstacles or danger spots in the outer spreading area in the dark, especially when it comes to wide spreading widths.
Unlike the tractor’s work lights, SpreadLight is specifically aimed at the spreading fan. The fertiliser granules thereby reflect the intensive LED light.
As simple as it is convenient, SpreadLight is remotely controlled by the ISOBUS terminal via a touchscreen. The operator can choose whether the headlamps are permanently lit or automatically switch off and on in the headland in order to avoid blinding oncoming traffic on the road. SpreadLight can be retrofitted as an option for all mechanical and hydraulically driven RAUCH AXIS.2 ISOBUS fertiliser spreaders.
Telimat Sensor
The optional AXIS Telimat sensor shows in the display of the QUANTRON-A or the ISOBUS terminal whether the Telimat thrower shield is in the ready position. It happens again and again that not only smartphone-happy farmers forget to raise the Telimat again after limited border spreading, thereby causing errors in the spreading results. Just one look at the display and you will be reminded of the Telimat’s position.
6 Year Warranty Against Rusting
AXIS fertiliser spreaders are characterised by their high-quality, durable ProTect double powder coating. Perfect protection against mechanical stress, UV light, salts and acids guarantees the construction will last a long time. RAUCH now offers a 6 years warranty against rusting on all AXIS fertiliser spreaders manufactured after September 2017.
Simply activate the anti-rust warranty for your new AXIS spreader with the barcode on the warranty sticker. Benefit from the legendary RAUCH quality for many years to come.
S2 | Working width:12-18m | ||
S4 | Working width:18-28 m | ||
S6 | Working width:24-36 m |
* Coated spreader vanes with VXR plus