Overview
Verti-Mix – The “New Generation”
Fodder mixing, discharge and cubicle bedding – all in one. The mechanically powered straw blower throws the bedding mixture up to a width of 20 m into the stable.
Our Verti-Mix 1251 with straw blower in action:
Key Features
Usable mixing capacity of 7,5-16,5 m³
Expandable by 180 mm or 360 mm attachments
Highest stability of the container due to patented embossing
All components have been designed for maximum mixing capacity
Technical Specifications
Type | Verti-Mix 951 (7,5 / 8,5 / 9,5 [m³]) | Verti-Mix 1251 (10,0 / 11,0 / 12,5 [m³]) | Verti-Mix 1401 (12,0 [m³]) | Verti-Mix 1651 (13,5 / 15,0 / 16,5 [m³]) |
---|---|---|---|---|
Dimensions | ||||
Length (m) | 4,65 | 4,87 | 5,10 | 5,10 |
Width with crossover conveyor (m) | 2,16 | 2,28 | 2,42 | 2,42 |
Width with one-sided discharge (m) | 2,26 | 2,38 | 2,52 | 2,52 |
Width with two-sided discharge (m) | 2,36 | 2,48 | 2,62 | 2,62 |
Outside wheel width (m) | 1,78 | 2,04 | 2,23 | 2,23 |
Extension height (m) | - / 0,18 / 0,36 | - / 0,18 / 0,36 | - / 0,18 / 0,36 | - / 0,18 / 0,36 |
Length with front crossover conveyor (m) | 5,30 | 5,50 | 5,75 | 5,75 |
Length with rear crossover conveyor (m) | 4,90 | 5,04 | 5,17 | 5,17 |
Behälterbodenfreiheit bei kleinster Bereifung (m) | 0,74 | 0,76 | 0,76 | 0,76 |
Distance Centre of drawbar lug - Centre of axle (m) | 3,38 | 3,47 | 3,72 | 3,72 |
Distance Centre of drawbar lug - Centre of axle with front crossover conveyor (m) | 4,10 | 4,19 | 4,29 | 4,29 |
Dead weight | ||||
with crossover conveyor (kg) | 3.200 / 3.260 / 3.300 | 3.800 / 3.860 / 4.150 | 4.840 / 4.900 / 4.960 | 4.840 / 4.900 / 5.000 |
Gross vehicle weight rating | ||||
Admissible tongue load (kg) | 1.000 | 1.200 | 1.400 | 1.400 |
Technically admissible gross vehicle weight rating 15 km/h, single axle (kg) | 7.000 | 12.000 | 12.200 | 12.200 |
Gross vehicle weight rating 25 km/h (StVZO), single axle (kg) | 7.000 | 9.000 | 11.400 | 11.400 |
Power required | ||||
without switchgear 23 rpm (HP) | - | - | - | 73 / 80 / 88 |
with switchgear 12.8/23 rpm (HP) | - | - | - | 45 / 49 / 54 |
with switchgear 28,8/13,8 rpm (HP) | - | - | - | 47 / 51 / 56 |
without switchgear 26 rpm (HP) | 35 / 39 / 42 | 50 / 53 / 56 | 64 / 69 / 74 | - |
with switchgear 26/14,4 rpm (HP) | 25 / 28 / 30 | 35 / 38 / 41 | 40 / 43 / 46 | - |
with switchgear 32,5/15,7 rpm (HP) | 27 / 30 / 32 | 37 / 40 / 43 | 42 / 45 / 48 | - |
without switchgear 30 rpm (HP) | 44 / 47 / 51 | 67 / 70 / 73 | 76 / 82 / 88 | 88 / 96 / 105 |
with switchgear 30/16,7 rpm (HP) | 32 / 34 / 37 | 47 / 50 / 53 | 54 / 58 / 62 | 62 / 69 / 73 |
with switchgear 37,5/18,1 rpm (HP) | 34 / 36 / 39 | 49 / 52 / 55 | 56 / 60 / 64 | 64 / 71 / 75 |
Axle - track width (mm) | 1.510 | 1.630 | 1.740 | 1.740 |
Container | ||||
Container wall thickness (mm) | 8 | 8 | 8 | 8 |
Bottom plate (mm) | 18 | 20 | 20 | 20 |
Container length inner dimension incl. overflow ring (m) | 2,63 | 2,93 | 3,27 | 3,27 |
Vehicle height depending on tyres with single axle | ||||
30 x 11.5 - 14,5 (m) | 2,30 / 2,48 / 2,66 | 2,59 / 2,77 / 2,95 | - | - |
250-15 18 (18 PR) (m) | 2,32 / 2,50 / 2,62 | 2,61 / 2,79 (reduction of load capacity 8.500 kg) | - | - |
10.0/75-15.3 (18 PR) (m) | 2,31 / 2,49 / 2,67 | - | - | - |
400/60-15,5 (14 PR) (m) | 2,43 / 2,61 / 2,79 | - | - | - |
400/60-15,5 (18 PR) (m) | - | 2,72 / 2,90 / 3,08 | 2,89 / 3,07 / 3,25 (reduction of load capacity 9.660 kg) | 3,05 / - / - (reduction of load capacity 9.660 kg) |
19.0/45-17 (m) | - | 2,72 / 2,90 / - (reduction of load capacity 8.500 kg) | - | - |
215/75R17.5 (133) double (m) | - | - | 2,80 / 2,98 / 3,16 | 2,97 / 3,15 / 3,33 |
435/50 R 19.5 (m) | - | 2,80 / 2,98 / 3,16 | 2,97 / 3,15 / 3,33 | 3,14 / 3,32 / ,50 |
8.15-15 (14 PR) double (m) | - | 2,58 / 2,76 / 2,94 | 2,76 / 2,94 / 3,12 | 2,94 / 3,12 / 3,30 |
Brochure
Find out more about this product by downloading our brochure
Specifications
The Vario² mixing auger in stepped flight design – Variability and strength for any purpose
Due to the patented knife adjustment system, the Vario² mixing auger in stepped flight design can be perfectly adapted to your specific conditions of use. The robust and low-maintenance angular gear ensures a long service life even under challenging conditions.
- Low power requirement
- Optimum fodder structure
- Homogeneous mixing
- Energy-saving short mixing times
Innodur
Optional „INNODUR“ wearing elements significantly extend the service life of the Vario² mixing auger in stepped flight design.
- 5 mm thick and 100 mm wide stainless steel elements
- Screwed to the auger windings with an overlap
- Subsequent mounting also possible
Ask for our heavy-duty version of the Vario2 mixing auger in stepped flight design with 20 mm strong windings for a 50 % longer service life (= 50 % less wear costs).
Magnetic System
- Highly effective magnetic separation of metallic foreign objects
- Optimum health protection for your high-yield cows
- Effectively because of direct and close contact with the mixed fodder
Different knife options for homogeneous mixtures and optimum fodder quantity
- Individual adaptations to different natures of fodder components
- Problem free retrofittable
- Straw knife
- Scraper: Ensure an additional mixing effect and an improved fodder movement
- Bale knife: Ideal for cutting round bales
- Root crop knife: Additional crushing of beets or potatoes
You want your business to grow – Your Verti-Mix adapts to your growing needs
The patented container embossing at the top container edge provides the Strautmann mixing container additional strength and stability. It serves as the basis for variable container extensions (0 mm – 180 mm – 360 mm) enabling you to adapt the capacity of the mixing container to your operational requirements.
- Flexible customised extension of the capacity
- Highest stability of the container due to embossing
- Design of all components for maximum possible container capacity
Fodder-protecting discharge via adjustable side chutes
At the side discharge devices, adjustable chutes support the fodder discharge. The side chute mechanically operated by the side gate
- Moves to rest position with the gate closed – Fodder residues move onto the swathe and do not fall onto the drive path
- Ensures fodder discharge beyond the lane – The wheels do not roll over the discharged fodder
Discharge in narrow dead-end feeding passages
- For comfortable feeding even in narrow dead-end feeding passages, side gates behind the wheels are being used
- The fodder is loosely discharged on one or both sides behind the wheels (except Verti-Mix L)
Rear centre discharge
- For central fodder discharge on the feeding table
- Ideal for the dosing of premixtures in silo units
Side discharge with conveyor extension
- Discharge with hydraulically folding conveyor extension
- Variable discharge width due to optional Speed adjustment via hand-operated regulator or E-Control
- Enables dosing into elevated feeding troughs
Crossover Conveyor
Front crossover conveyor
- Clean and homogeneous fodder discharge
- Optimum view of the fodder discharge from the tractor seat
- Variable discharge width due to optional Speed adjustment via hand-operated regulator or E-Control
- Optional 2nd hydraulic motor for two-sided drive
Rear crossover conveyor
- Clean and homogeneous fodder dischargeIdeal for discharge in dead-end feeding passages
- Optimum view to the rear due to optional rear-view camera
- Variable discharge width due to optional speed adjustment via hand-operated regulator or E-control
Crossover conveyor with hydraulically folding conveyor Extension
- Clean and homogeneous fodder discharge
- Enables the charging of elevated troughs and feeding tables
- Despite increased discharge width, compact dimensions due to hydraulic swivel mechanism
- Variable discharge width due to optional speed adjustment via hand-operated regulator or E-control
Bedding
Additional benefit for your Verti-Mix by use as bedding equipment
Fast bedding roller*
The cleaner and more germ-free the cubicle, the healthier the animals. The ideal bedding materials are straw, peat, sawdust and lime. After the mixing process in the container has been finished, the bedding material is spread up to the head region of the cubicles via the roller – comfortably and reliably for maximum animal comfort and udder health.
*only in combination with E-control
Straw blower*
- The Vario² mixing auger in stepped flight design easily cuts up the straw bale and undoes it.
- The mechanically powered straw blower throws the bedding mixture up to a width of 20 m into the stable.
- Electro-hydraulic operation for the straw blower functions
- The standard position of the blower outlet is on the right-hand side in the direction of motion.
- The throwing range can be hydraulically adjusted by means of a chute.
*except for Verti-Mix-L (Straw blower only available with front discharge)
Feeding roll
- Optional hydraulically powered feeding roll
- Positioning in front of the throwing blower enables interruption of the discharge by switching the roll off
- Particularly recommended for more humid bedding mixtures and fodder discharge into elevated troughs
Rotary tower Adjustment
- Optional rotary tower Adjustment
- Throwing blower can be hydraulically rotated from right-hand discharge in the direction of motion to left-hand discharge
Operating and weighing – Take your choice
Strautmann responds to individual customer demands also with regard to the kind of operating device. The selection of the operating option depends on the user‘s requirements.
Direct tractor connection
One double-acting control device for each function. Reasonable if:
- The tractor is uncoupled only rarely
- The fodder mixing wagon is only equipped with a side discharge
Operation via bowden cable
One double-acting control device at the tractor or alternatively one single-acting control device with free return line. Reasonable if:
- Older tractors with only a few control devices are used
Electrical control set
One double-acting control device at the tractor or alternatively one single-acting control device with free return line. Reasonable if:
- Awareness of comfort is existent and an increase in efficiency is requested
Weighing
PTM HL 50 – programmable weighing device without data Transfer
Sart model of the Strautmann weighing devices.
- 50 recipes
- From 30 ingredients
- Assessment
- Acoustic/Visual signal
PTM Advance Super USB – programmable weighing device with data transfer
A complete feeding control including time recordingis of fundamental importance for cost optimisation on dairy farms.
- 150 recipes
- From 30 ingredients
- Multiline Display
- Multi-Link compatible – several devices can be connected
- Optional: Read-out and management by means of included Software
- Optional: Wireless communication with farm PC via WLAN antenna
PTM AV 70 – Radio remote control
The PTM AV 50 is a radio remote control to fit HL 50 and PTM Advance Super USB.
- 30 m of range
- Multi-Link compatible
- Individual fixing on the charging vehicle by means of integrated magnet
- Can be easily carried by hand
Adding Scale EZ 2810
- Without data Transfer
- Tare function
- Mixing time adjustable
- With Bluetooth antenna (free “FeedApp” for easy preparation of feed rations with your smartphone)
Digi Star EZ 3610
Programmable weighing device
- 150 Recipes
- 99 Ingredients
- With optional data transfer if software packages are available