The Swath Belt that Automatically Adjusts
The Kverneland BX is primed to maximise working capacity and utilise the full capacity of the 53100 without compromising on quality of work. Kverneland BX automatically does the job of adjusting belt speed to working width, for the same uniform swath width, regardless of position of mowing units. In combination with GEOMOW, that provides automatic GPS steered overlap control and constantly optimises on overlap and working width, this means maximum working capacity, excellent operator comfort and an even, uniform swath formation.
Features all the same advantages as the "standard" 53100 MT/MR Vario model. Additional advantages include:
Automatic belt speed adjustment
Adjustable belt height
Belt boost for headland operation
Autostop function for minimised fuel consumption
Versatile 4-in-1 solution
|No. of Discs
|53100 MT Vario BX
|2 x 9 Discs
|SemiSwing Steel Tine Conditioner
Automatic Belt Speed Adjustment
Same Uniform Swath Formation…
Kverneland BX automatically adjusts belt speed, whenever a change is needed. If mowing units are sideshifted to adjust overlap, belt speed immediately adjusts, to compensate for the change in throwing distance needed. When increasing overlap for mowing around corners, belt speed is lowered.
…Even When Using Just One Belt
In addition Kverneland BX also detects when a belt or mowing unit is raised, and immediately compensates to ensure crop stays within the intended swath width. Belt speed of the working belt is automatically reduced, to avoid crop “flying over” the centre swath.
Adjustable Belt Height
Shape the Swath As You Want
Working in heavy first cut crop, combined with a narrow pick-up width of the following machine, may cause challenges in getting the swath narrow enough. Kverneland BX offers the possibility of positioning the swath belt in different operating heights, to deliver the crop on top of the swath made by the front mower, to make a narrow and box shaped swath. Delivery height is set by lowering or raising the belt hydraulically on-the-go.
Clean and Tidy Headlands
When the mowing units are activated for headland lift, an integrated belt boost automatically speeds up, to empty the belts before they are raised, leaving a clean and tidy headland. Furthermore the AutoStop is activated once belts are raised, automatically stopping them until mowing units are lowered again, keeping fuel consumption low.
Versatility via four-in-one solution offered by the Kverneland 53100 BX, allowing one large swath, three single swaths, full width wide spreading, or using one belt only. The standard fitted swath plates are easily slided into position for the desired swath width. If conditions require wide spreading, the standard fitted FlipOver wide spreading vanes are activated in seconds.
Vario – Suspension Arm
Hydraulic Adjustment of Overlap
Kverneland 3336 MT Vario and 53100 MT Vario are fitted with hydraulic SideShift integrated into the carrying arm allowing each mowing units to move 400mm. To easily compensate for changing field conditions, the adjustable overlap is designed as a telescopic arm, directly into the suspension.
Ground Pressure Remains Constant
During mowing operation the carrying arm always remains even to the ground, giving the mowing unit the freedom to instantly compensate and float across uneven ground contours. The true benefit of the suspension concept is that even though overlap is changed, the chosen ground pressure remains the same.
GEOMOW unlocks the full potential of the Kverneland 53100 MT Vario. The all-new Kverneland GEOMOW application delivers automatic headland lift via section control.
GEOMOW removes the risk of mistakes when lifting mowing units too early, or lowering them too late. When reaching the end of the field, the front mower is automatically raised as it hits already cut grass on headlands, rear units are lifted at the right time as well, allowing the operator to fully focus on turning as efficiently as possible.
Full Width BreakBack
Our NonStop BreakBack system just got even better. With the new QuattroLink suspension this system now offers protection across the full working width of the mower, including the part closest to the tractor. There are no limiting factors on the inside part of the mower, giving the driver true peace of mind. When hitting an obstacle in the field, the mowing unit will instantly move backwards and up, and then return to the original position
BX Belt – Quick Coupler
With the optional Kverneland quick-coupler solution, it is now possible to dismount the two BX belts in less than 10 minutes and park them safely on specially designed transport rollers. When disconnected, the BX belts automatically disappear from the terminal screen.
This gives you the option of deciding from day to day, when work schedule is ready, if belts are needed or not. All it takes are three simple steps – no tools required!
1. Slide the purpose-built transport rollers onto the BX-belt and remove the connection pin.
2. Disconnect the power cable and all hydraulic connections to BX belt with one single lever.
3. Lower the mowing units and the BX belt automatically comes off.