High output and cost effective
MF RB 3130F fixed chamber balers feature 1.5 cubic meter bale chamber with 18 Powergrip rollers and mechanical tail-gate lock ensuring consistent bale shape and density while Hydroflexcontrol, two stage protection system keeps you going faster automatically preventing up to 80% of potential blockages.
An extremely reliable and high performing range of baler models tailored to your specific needs producing high density hay, silage or straw bales, while remain simple, easy to set up and adjust.
BALE CHAMBER WIDTH
|Models||Feeder or Cutter Options||Bale Chamber Volume (m3)||Approximate Weight (kg)|
|MF RB 3130F Round Baler Classic||Feeder rotor||1.50||3,000|
|MF RB 3130F Round Baler Xtra||Xtracut 13 or 17 or 25||1.50||3,200|
High Speed Pick-Up
Higher operating speeds are possible with the Massey Ferguson cam-less pick-up design.
With fewer moving parts, the cam-less pick-up is quieter, simpler and more reliable. Low maintenance and less adjustments save time and increase productivity.
The pick-up system has five tine bars with each one being spaced only 64mm apart, providing higher capacity and a smoother even feed at high speed.
On the Massey Ferguson round balers, the pick-up is positioned very closely to the rotor, therefore improving crop flow and reducing the risk of blockage.
Designed for optimum performance, Massey Ferguson Xtracut can be equipped with 13, 17 or 25 knives. Cutter units are fitted with the longest knives on the market, making sure that no material will pass through uncut.
Xtracut 17 and 25 feature two sets of hydraulically operated knife banks with separate control from the cab depending on customer requirements.
The operator can select:
- A single knife bank
- Both knife banks
- Disengagement of all knives
o maximise efficiency in the field and minimise downtime from crop blockages, the MF Round balers are fitted with the unique Hydroflexcontrol protection system which works in two stages:
Stage 1. Automatic mechanical floor cushioning to clear minor blockages
Stage 2. Hydraulically controlled floor lowering to clear major blockages
The first stage of Hydroflexcontrol allows movement of the front part of the feed chamber floor and will automatically prevent up to 80% of potential blockages and will keep you going without unnecessary downtime.
Should a major blockage occur, stage two of hydroflexcontrol is activated by the operator, and is cleared by lowering the rear of the feed table floor hydraulically from the cab, allowing for material to easily pass through, therefore minimizing downtime.
The bale chamber is made up of 18 Powergrip rollers which ensure an effective grasp and quicker bale rotation for higher density and improved bale shape.
Rollers with 10 ribs are made from a seamless solid tube. They are the industry benchmark for durability and performance, known for their proven design and capability to withstand the harshest environments.
Perfect wrapping of perfectly formed bales is provided by the Varionet or Variotwinsystems, saving cycle time, tying materials and preserving bales for safe handling and storage afterwards.
Varionet and Variotwin
The tried and tested Varionet net wrapping system features a special net tensioning and spreading device that is capable of dealing with various widths and types of net allowing for fast wrapping of bales from edge to edge or over the edge.
The optional Variotwin twine system offers simple and economical bale tying. The unique Variable Speed Control allows for additional twine revolutions on the bale edges, securing bale ends and increasing overall tying speed, which is particularly beneficial when baling light crops.
Easy Loading System (ELS)
Fitted as standard, the Easy Loading System (ELS) allows one spare roll to be carried on the baler. Roll replacement can be made in a matter of minutes, thus extending your time in the field and increasing output.
Monitoring and Controls
The MF RB 3130F is available with the E-Link Control unit as standard; the E-Link Pro monitor with ISOBUS technology is optional for the MF RB 3130F Xtracut; Balers can also be specified with an ISOBUS connection for utilising tractor monitors.
The E-Link Control unit offered as standard on the Massey Ferguson RB 3130F allows the operator a great overview of the key baler processes with all adjustments made through the monitor. Its High Definition screen provides clear working images.
The following functions can be controlled with the E-Link Control terminal:
– Knife selection
– Bale pressure adjustment
– Bale size adjustment
– Net layer adjustment
– Net start/stop/pause
– Visual bale chamber filling
– Softcore bale on/off
– Bale counter
– Total bale counter
– Customer settings
– Sensor and actuator settings
E-Link Pro Monitor
The E-Link Pro monitor is optional for the MF RB 3130F Xtracut, has integrated ISOBUS technology and features a large bright screen which offers great visibility of multiple parameters, giving the operator more information and control of the baler. If a tractor is fitted with ISOBUS control it is also possible to use the tractor’s monitor to view all the key information about the tractor and the baler in one place.
Specific field or customer information, such as the number of bales or hours worked, can easily be set and collected with the Wizard and later exported via a USB connection for easy management of records and further performance analysis.
The MF RB 3130F baler can be specified with ISOBUS connection for utilising tractor monitors.Utilising a single in-cab terminal in the tractor for all implements reduces cab clutter and can make for simpler and more accurate control by drivers who may carry out a wide range of operations with different machines.